Bathroom Electrical - Receptacle Box, Light and Fans
The few receptacle boxes that are in the bathroom will need to be placed carefully. Blocking might be needed near the entryway framing to keep the switches and switchplate cover out of the way of the door casing, and you'll need to catalogue for the height of the vanity backsplash in determining the location of the vanity outlets. Duplicate sinks should have whether one outlet placed in between the sinks or two outlets-each placed within 12 in. Of whether side of the sink. Because some treatment cabinets have integral lights and are hard-wired, you may not need a fixture box for the cable; if that's the case, you can just run cable long and hard-wire it into the cabinet when it is mounted later on. Lights and fans Vanity and ceiling lighting, which is pretty much all things other than hard-wired treatment cabinets with integral lights, will wish mounting whether fixture boxes (for surface-mounted lighting), recessed-light housings, or composition fan/lights or fan/light/heaters.
A pancake box, the most common type of fixture box, is round and about 1/2in. Thick and 3-1/2in. Or so in diameter, though slightly larger diameters and depths are available. The light fixture mounts whether directly to the pancake box or to a mounting plate that is screwed to the box, and boxes can be mounted whether on the wall or on the ceiling. (By the way, don't use plastic receptacle boxes for ceiling-mounted fixtures because they aren't strong enough.) In most cases, the pancake boxes don't even need to be recessed and can be mounted directly on the wall or ceiling and screwed to the framing underneath because they are regularly totally covered by the fixture. Recessed lights ordinarily have their own self-contained wire-connection box.
Toilet Frame Safety
They are regularly attached to the framing with metal hangers, with the bottom face of the housing flush with the bottom of the framing. Some recessed-light housings are rated for feel with insulation (called Ic-fixtures) and can be used in attic spaces. Thermal housings (called T-fixtures) have a thermal protector to disrupt the electrical association if the unit gets too hot, and they need to be kept at least 3 in. From any outside insulation. Like recessed-light housings, composition fan/light housings fan/light/heaters regularly mount to the framing with metal hangers. These units aren't regularly mounted in the immediate shower area unless they're rated for use in wet locations. If the ventilation fan is a remote unit, it can be mounted later if the location is accessible, though provisions for duct runs and electrical connections will have to be made.
Bathroom Electrical - Receptacle Box, Light and Fans
Check Price on - Toilet Frame Safety Products
7-Inch Widescreen Digital Photo Frame - Wooden Design - Multimedia - LCD Widescreen - ClassicDesign Diamond Blades Wheel Hand Tool,Electric Power Tools Baby Socks 0-6 Months - Baby Clothings - Cotton Baby Socks - Baby hats
No comments:
Post a Comment